FOR BEST RESULTS ALWAYS KEEP PRODUCT AND BUMPER SURFACE CLEAN REGULARLY WASH BUMPERTEK WITH A MILD SOAP AND WATER AS NEEDED NEVER PASS THROUGH AN AUTOMATED CAR WASH WITH BUMPTEK ATTACHED OUTSIDE VEHICLE

HOW TO INSTALL YOUR REAR BUMPER GUARD

Bumper Protection Instructions: Please Read All Instructions and Warnings Before Using Product.

(1) Make sure bumper surface is clean and free of dirt and debris
(2) Open trunk and attach bumper guard straps to the trunk carpet * (Figure 1)
(3) Center the bumper guard on the car bumper and reposition straps as needed.
(DO NOT BLOCK VEHICLE EXHAUST PIPES)
(4) Flip-Out Bumper Guard when you park. Replace bumper guard inside vehicle trunk before driving/operating vehicle.

(DO NOT DRIVE WITH PRODUCT ATTACHED. FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN VEHICLE DAMAGE AND INJURY)

*** If Velcro does not adhere to the vehicle's carpet, use the two extra velcro stickers provided. Attach velcro stickers to a clean smooth surface under the trunk carpet or another accessible area; the straps ends can then attach here. If your vehicle has a spare tire compartment in the trunk, you may drop the straps into the compartment and close the lid (Figure 3). The weight of the lid will keep the straps in place.

OPTIONAL: If the BumpTek blocks your rear license plate you may cut out the center portion using a a razor. Use the raised edge as a guide.

BumpTek Bumper Guard - The Most Affordable Car Bumper Protection
Car bumper protection should not put a dent in your wallet. The new BumpTek rear bumper protector has features of more expensive car bumper guards, but at a cheaper cost. Value added features include an extra wide 44” bumper protection surface, stabilizer bars, horizontal impact bars, etc. Car bumper guards are the best way to protect your car bumpers when parking on the street. BumpTek rear bumper guards will not sell you gimmicks like cheap reflectors that will peel or fade.